Hawaii IRC Adoption

View Details
X - Effective Statewide
View Details
L - Adopted by Local Governments


Tim Hiu, State Building Official
(808) 586-0400
Socrates Bratakos, Administrator of Honolulu Fire Department
(808) 723-7151
Howard Wiig, State Institutional Energy Analyst
(808) 587-3811
State Dept. of Health, Office of Environmental Quality Control
(808) 586-4433


Website: https://portal.ehawaii.gov/
Code Adoption Information: https://ags.hawaii.gov/bcc/building-code-rules/

Hawaii Information

The Hawaii 2007 Legislature created a new Building Code Council Agency that has the authority to adopt any code(s) statewide. The statute specifically names the IBC as one of the statewide codes. The statute also grants authority to adopt other codes as the Council determines, and requires the adoption of a Mechanical code, Private Sewage Disposal Code, Residential Code, Energy Efficiency Code and an Existing Building Code. Upon completion of the code adoption by administrative rulemaking, all State Buildings must use the adopted codes within 1 year. The Four County jurisdictions have 2 years in which to adopt and amend the State Code with local amendments. If the county jurisdictions do not comply within the 2-year timeline then the State Code becomes the county’s code until such time the county passes an adopting ordinance.

2006 IRC Egress Codes - Quick Glance

Window Well Requirements for Egress







Without an Egress Ladder


With a Permanent Egress Ladder

Basement Window Requirements for Egress


5.7 ft²

Above Grade


5 ft²

Below Grade





Last updated: Monday, November 23, 2020
Notice: Please verify with your local county building inspector to double check your code requirements before starting a project. We try to keep this database up-to-date as best as possible, but express no warranties on accuracy of information. If you find a mistake or have any questions, please Contact Us or call 1-888-650-9355

2006 International Residential Code


R310.1 Emergency escape and rescue required.

Basements and every sleeping room shall have at least one operable emergency escape and rescue opening. Such opening shall open directly into a public street, public alley, yard or court. Where basements contain one or more sleeping rooms, emergency egress and rescue openings shall be required in each sleeping room, but shall not be required in adjoining areas of the basement. Where emergency escape and rescue openings are provided they shall have a sill height of not more than 44 inches (1118 mm) above the floor. Where a door opening having a threshold below the adjacent ground elevation serves as an emergency escape and rescue opening and is provided with a bulkhead enclosure, the bulkhead enclosure shall comply with Section R310.3. The net clear opening dimensions required by this section shall be obtained by the normal operation of the emergency escape and rescue opening from the inside. Emergency escape and rescue openings with a finished sill height below the adjacent ground elevation shall be provided with a window well in accordance with Section R31 0.2. Emergency escape and rescue openings shall open directly into a public way, or to a yard or court that opens to a public way. Exception: Basements used only to house mechanical equipment and not exceeding total floor area of 200 square feet (18.58 m2).
R310.1.1 Minimum opening area.

All emergency escape and rescue openings shall have a minimum net clear opening of 5.7 square feet (0.530 m2). Exception: Grade floor openings shall have a minimum net clear opening of 5 square feet (0.465 m2).

R310.1.2 Minimum opening height.

The minimum net clear opening height shall be 24 inches (610 mm).

R310.1.3 Minimum opening width.

The minimum net clear opening width shall be 20 inches (508 mm).

R310.1.4 Operational constraints.

Emergency escape and rescue openings shall be operational from the inside of the room without the use of keys, tools or special knowledge.

R310.2 Window wells.

The minimum horizontal area of the window well shall be 9 square feet (0.9 m2), with a minimum horizontal projection and width of 36 inches (914 mm). The area of the window well shall allow the emergency escape and rescue opening to be fully opened. Exception: The ladder or steps required by Section R310.2.1 shall be permitted to encroach a maximum of 6 inches (152 mm) into the required dimensions of the window well.
R310.2.1 Ladder and steps.

Window wells with a vertical depth greater than 44 inches (1118 mm) shall be equipped with a permanently affixed ladder or steps usable with the window in the fully open position. Ladders or steps required by this section shall not be required to comply with Sections R311.5 and R311.6. Ladders or rungs shall have an inside width of at least 12 inches (305 mm), shall project at least 3 inches (76 mm) from the wall and shall be spaced not more than 18 inches (457 mm) on center vertically for the full height of the window well.

R310.3 Bulkhead enclosures.

Bulkhead enclosures shall provide direct access to the basement. The bulkhead enclosure with the door panels in the fully open position shall provide the minimum net clear opening required by Section R310.1.1. Bulkhead enclosures shall also comply with Section R311.5.8 .2.

R310.4 Bars, grilles, covers and screens.

Bars, grilles, covers, screens or similar devices are permitted to be placed over emergency escape and rescue openings, bulkhead enclosures, or window wells that serve such openings, provided the minimum net clear opening size complies with Sections R310.1.1 to R31 0.1.3, and such devices shall be releasable or removable Ifrom the inside without the use of a key, tool, special knowledge or force greater than that which is required for normal operation of the escape and rescue opening.

R310.5 Emergency escape windows under decks and porches.

Emergency escape windows are allowed to be installed under decks and porches provided the location of the deck allows the emergency escape window to be fully opened and provides a path not less than 36 inches (914 mm) in height to a yard or court.

Browse By Cities / Counties in Hawaii

If your city or county is not listed here, please contact your local county building inspector for more information.

United States IRC Code Adoption PDF - by state

Find Your State's IRC Code Adoption

Download the State Local Codes Chart PDF to determine which International Residential Code your state follows. Depending on your State, your local county may have additional/different requirements. Please refer to your local government website for up-to-date information and to confirm the information on this page.